Home > News > Content
Buy Common Sense For Glass Blocks
Jul 13, 2017



Buy common sense for Glass Blocks

Colored Glass Blocks belong to special Glass Blocks, also known as heat-absorbing Glass Blocks, which usually block about 50% of the sun's radiation. A blue glass 6 mm thick can only penetrate 50% of the sun's radiation, and the tea color and bronzer can only penetrate 25% of the sun's rays. Therefore, the absorbent Glass Blocks is suitable for the building doors or Windows or outer walls of hot areas that need both light and heat insulation

In the home decoration, the original colorless transparent Glass Blocks window is replaced by blue or green, tea color and other colored Glass Blocks, such decoration is improper.

Colored Glass Blocks belong to special Glass Blocks, also known as heat-absorbing Glass Blocks, which usually block about 50% of the sun's radiation. A blue glass 6 mm thick can only penetrate 50% of the sun's radiation, and the tea color and bronzer can only penetrate 25% of the sun's rays. Endothermic Glass Blocks, therefore, is suitable for both should be light and need to be insulated hot areas outside the building doors and Windows or wall, in this way, can have insulation and anti-glare effect already, can build a kind of beautiful cool atmosphere again. However, in the urban residential buildings can be sterilized, sterilized, and the sunlight of the effect, is blocked by these colored Glass Blocks in half, it is not worth the loss.

In addition, some households to install the screen window, the light transmittance was 70%, and the colorless transparent common Glass Blocks combination, total light transmittance about 61%, is appropriate, but if deserve to go up non-ferrous endothermic Glass Blocks, its light transmittance is only 35%, definitely affect indoor lighting requirements.

Some residents have also blocked the balcony with colored Glass Blocks. The balcony is the only place that the bedroom encounters with nature directly, should not be closed, more cannot decorate with colored Glass Blocks. If long-term living in the weak light environment such as blue grey, tea color, indoor line of sight quality is inevitable decline, easy to make a person physical and mental exhaustion, to health will have undesirable effect.

Indoor decorate appropriate to use the ordinary Glass Blocks of high transmittance, outside the window is equipped with convenient shading equipment, indoor can install transparent or translucent curtain and opaque window curtain. In this way, it can not only play the wind, rain, heat insulation and sound absorption, but also fully enjoy the sunshine bath.

1. During transportation, be sure to fix and add soft pads. It is generally recommended that a vertical method be used for transport. Vehicle driving should also be noted for maintaining stability and slow speed.

2. If the other side of the Glass Blocks is enclosed, be sure to clean the surface before installation. It is best to use a special glass cleanser, and after drying it, it is necessary to install it without stain, and it is best to use clean building gloves when installing.

3. The installation of the Glass Blocks should be fixed with silicone sealant. In the installation of the window, the rubber seal should also be used.

4. After the completion of the construction, notice the anti-collision warning sign, which can be used for the prompt of non-stick, colored electrician tape.

On November 31, the latest glass collection guidelines will be implemented, meaning that a large number of Glass Blocks, pieces of glass and other Glass Blocks will be recycled.

The Glass Blocks recycling guidelines are drawn up by the joint research center. The guidelines stipulate that the glass fragments must comply with the relevant specifications or standards, or they may not be directly used in the manufacture or direct melting of Glass Blocks. Metal, organic matter, stone and so on can be classified as a block of glass fragments, as secondary raw materials.

The final recovery criteria are aimed at stimulating the European recycling market, reducing unnecessary administrative burdens and providing safe, clean Glass Blocks for recycling. The guidelines also specify which pieces of glass can be directly used as raw materials for other products and which can't.

In the past, a lack of clear and uniform standards has led some eu countries to recycle uncompatible pieces of glass, leading to wasteful waste. Therefore, the joint research center introduced a unified standard by evaluating the value and use of Glass Blocks. The implementation of this standard also suggests that the process of standardizing European Glass Blocks has taken a big step back