Home > News > Content
Explain The Installation Of Tempered Glass Door To Pay Attention To The Point
Sep 06, 2017

Explain the installation of Tempered Glass Door to pay attention to the point
    Tempered Glass Door is also a prestressed glass, you want to improve the strength of the glass door, glass surface can form a compressive stress, then the glass to withstand external forces, you can offset the surface stress, installation of glass doors need to pay attention to what? Tempered Glass Door manufacturers to tell you.
    1, before installing the Tempered Glass Door, first check the next glass door to see if the Tempered Glass Door for damage, and the specifications of the glass door, etc. meet the installation requirements.
    2, Tempered Glass Door manufacturers prompt you, if the installation of the other side of the glass door is closed, then the need to clean the installation, it is recommended that you use glass cleaner, until after drying in the installation.
    3, the installation of Tempered Glass Doors, to avoid exposure to rain, nor cold and overheating, the installation of the glass door to ensure a solid, can not use the hard objects to hit the glass door.
 Toughened glass door is a surface with a compressive stress glass, which is the use of the steel method to enhance the glass, the safety performance is relatively high, leading to the deformation of the glass door What are the reasons? Tempered Glass Door manufacturers for everyone to analyze the next.
    First, the cooling will cause uneven deformation of the glass door, Tempered Glass Door heated to soften the point will be quickly cooled, the glass surface pressure, glass cooling in the upper and lower surface cooling speed is uneven, there will be deformation.
    Second, the Tempered Glass Door manufacturers suggest that the heating temperature is also caused by uneven deformation of the glass in the heating up and down the surface there will be temperature difference, or the middle of the glass and the edge of the existence of temperature difference, will easily lead to deformation of the glass.
The use of Tempered Glass Door, even if the Tempered Glass Door is damaged, the debris is honeycomb broken small particles, so the security is better, the installation of glass doors will encounter flatness is not good, the glass door factory to teach you how Improve the flatness of the glass door.
    1, Tempered Glass Door flatness is not good reason, mainly lies in the quality of Tempered Glass Doors, so you want to ensure the quality of Tempered Glass Doors, or to choose a good quality of glass doors.
    2, Tempered Glass Door manufacturers suggest that we should improve the flatness of the glass door, you can let the roller have enough warm-up time, so that the roller can be heated evenly, to eliminate stress.
    3, uneven cooling will cause heat distortion, to adjust this problem, you can adjust the wind pressure by the wind gate, to adjust the cooling rate of the glass door surface.
   Tempered Glass Doors are pre-stressed glass, the use of physical methods, can improve the strength of glass, Tempered Glass Door safety performance is also very good, usually in the use of glass doors, how to choose? Tempered Glass Door manufacturers to teach you.
    First, in the choice of Tempered Glass Doors, we must first look at the quality of the surface of glass doors how to look at the surface of the glass oil cracks, missing angle and so on, and whether the size of the glass meet the requirements.
    Second, the Tempered Glass Door manufacturers prompt you, in the choice of Tempered Glass Doors, to see how the flattened Tempered Glass Doors, and whether the glass is homogeneous and so on.
    Third, the choice of Tempered Glass Doors, but also look at the impact of glass doors of the impact of how the performance, then there is the state of the glass door to see whether the glass meet the requirements.