Home > News > Content
Teach You To Improve The Flatness Of The Tempered Glass Door
Sep 29, 2017


The use of Tempered Glass Door, even if the Tempered Glass Door is damaged, the debris is honeycomb small pieces of broken particles, so the security is better, the installation of glass doors will encounter flatness is not good, the glass door factory to teach you how Improve the flatness of the glass door. Tempered Glass Door flatness is not good reason, mainly lies in the quality of Tempered Glass Doors, so you want to ensure the quality of Tempered Glass Doors, or to choose a good quality of glass doors. Tempered Glass Door manufacturers suggest that to improve the flatness of the glass door, you can let the roller have enough warm-up time, so that the roller can be heated evenly, to eliminate stress. Cooling uneven, then it will cause heat distortion, to adjust this problem, you can adjust the wind pressure by the wind gate, to adjust the cooling rate of the glass door surface.
Tempered Glass Door is a prestressed glass, the use of physical methods, can improve the strength of glass, Tempered Glass Door safety performance is also very good, usually in the use of glass doors, how to choose? Tempered Glass Door manufacturers to teach you.
In the choice of Tempered Glass Doors, we must first look at the quality of the surface of the glass door how to look at the surface of the glass oil cracks, missing angle and so on, and whether the size of the glass meet the requirements. Tempered Glass Door manufacturers prompt you, in the choice of Tempered Glass Doors, to see how the smoothness of the glass door, and whether the glass after homogeneous treatment. Select the Tempered Glass Door, but also look at the impact of glass doors of the impact of how the performance, then there is the state of the glass door to see whether the glass meet the requirements.
The production of Tempered Glass Door, the glass between a layer of polymer, and after high temperature preheating bonding, and its safety effect is better, but do not pay attention to the words of the glass door will be deformed, Tempered Glass Door manufacturers Introduce the reason for you. Processing. Tempered Glass Door deformation, it may be in the processing of the problem, if the Tempered Glass Door in the processing of substandard quality, then there will be deformation. surroundings. Tempered Glass Door manufacturers tell you that the environment is also a major factor, such as temperature, pressure and other aspects, are caused by the deformation of the glass door deformation.
Overall, said the main reason for the deformation of the glass door is the above two points, you want to prevent the Tempered Glass Door is not deformed, glass manufacturers to suggest that we can from the above two aspects to deal with.
Tempered Glass Door is a surface with a compressive stress glass, which is the use of the steel method to enhance the glass, the safety performance is relatively high, leading to the deformation of the glass door What are the reasons? Tempered Glass Door manufacturers for everyone to analyze the next.
Uneven cooling will cause the hot deformation of the glass door, Tempered Glass Door heated to softening point will be quickly cooled, the glass surface pressure, glass cooling in the upper and lower surface cooling speed is uneven, there will be deformation. Tempered Glass Door manufacturers suggest that the heating temperature is also caused by uneven deformation of the glass in the heating up and down the surface there will be temperature difference, or the middle of the glass and the edge of the existence of temperature difference, will easily lead to deformation of the glass.
The glass door in the middle of a layer of polymer interlayer, even if the use of broken will not be scattered, many people like the glass door is also because of this, but the use of glass doors will have some defects, Manufacturers for these defects to tell you about coping methods.
Degumming. Tempered Glass Doors in the use of the process, do not pay attention to the phenomenon prone to degumming, the emergence of this situation we can choose good quality of the original film glass, glass and film to clean, preload temperature should be appropriate. broken. Tempered Glass Door used in the case of broken, manufacturers recommend the use of high-quality glass of the original glass, adjust the pre-press press roller, so that it can even pressure just fine.